OKX Wallet download

List of contents of this article:

• 1,How to turn on the high beam
• 2、The high beam is not on isWhat is the cause analysis
• 3, How to turn on the high beam of the car
• 4, How to turn on the car high beam
• 5, What is the difference between high beam and low beam of car headlights?

How to turn on the high beam

There are several ways to turn on the high beam: turn the left joystick towards the driver, turn on the high beam, automatically reset the high beam after release, and turn off the high beam. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

(1) The left joystick is turned in the direction of the driver, the high beam is turned on, the joystick is automatically reset after the hand is released, and the high beam is turned off.This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

The switch of the high beam is generally on the joystick on the left side of the steering wheel, that is, the joystick of the left turn signal and the right turn signal. First, turn on the lom beam. The switch of the lowilight is different depending on the vehicle. Some models are on the joystick on the left side of the steering wheel; some models are on the left light knob.

From the dashboard, the sign of the high beam is that the angle of the irradiation line of the light is straight and not inclined; the angle of the irradiation line of the low beam is inclined downwards. The high beam switch is the light lever on the left and right of the steering wheel. Turn on the high beam in the direction of the front of the car, and turn it off when you turn it back.

What is the reason for the reason why the high beam is not on

1. Due to the duration of use or quality, poor sealing, water and foreign matter appear inside , dust, the light is blocked, causing the light to become weak or not bright. Solution: It needs to be dismantled and cleaned. If the effect is not good, the headlights should be replaced.

2. SteamThe reasons why the high beam of the car suddenly does not turn on are as follows: line failure: the connection of the line is poor or loose, and the plug-in parts are not in place. It is necessary to check the line to ensure that the line is fully connected. The size and power of the replaced bulb are inconsistent: The power of the bulb is inconsistent and cannot be connected, and the bulb of the same power needs to be replaced.

3. Method: It is possible that the filament is burned, the iron is not good, the brake light switch fails or the line is broken; check whether the fuse is melted, and if it is melted, it needs to be reinstalled.

4. There are several reasons why the high beam of the car is not on: the fuse is damaged; there is a problem with the circuit; and the bulb is damaged.

5. Hello, there may be several reasons why the high beam is not on. The high beam fuse is broken, the high beam relay is faulty, and the main plug of the high beam is broken. The high beam device used for dimming and turning on the light is faulty.The high beam filament of the light bulb is damaged.

6. The high beam is not on (1) Fault phenomenon: When the headlights are turned on, only high beam or only near beam. ( 2) Causes of failure: the light transformer is damaged, the line is broken or short-circuited, the filament burns out, and the lamp holder is in poor contact. ( 3) Troubleshooting: First, connect the headlight switch to the headlight, turn on the changing light switch, and check the high beam indicator light.

How to turn on the high beam of the car

1. The high beam of the car can be turned on through the light lever switch. First, turn the light switch to the low beam and then pull the lever to adjust the low beam to high beam. The specific steps are: find the light lever-type regulation switch of the car and pay attention to the various icons marked on it.

2, (1)It is the left joystick to the direction of the driver, and the high beam is turned on. After the hand is released, the joystick is automatically reset and the high beam is turned off. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

3. The way to turn on the high beam and low beam is: high beam: push the light control lever forward; low beam: screw the light control switch on the left side of the steering wheel forward twice. The precautions for the use of car lights are: turn on the lom headlights when driving at night.

How to turn on the high beam of the car

Usually, the high beam is usually turned on by turning the switch to the position of the hood; back one gear, turn off the high beam, and restore the low beam; turn one gear in the direction of the driver, and temporarily flash the high beam.After releasing the switch, the switch will automatically return to the near-light gear. This is usually used to remind vehicles in the opposite lane, that is, alternating high and near lights.

Usually, if you turn the switch to the position of the engine cover, the high beam is often turned on; if you turn back a gear, turn off the high beam, and restore the low beam; then turn a gear in the direction of the driver, and the temporary high beam flashes. After the switch is released, the switch will automatically restore to the low beam gear.

There are several ways to turn on the high beam: turn the left joystick towards the driver, turn on the high beam, automatically reset the joystick after release, and turn off the high beam. This operation is called "flashing light" (dial, let go). Usually, we can use this way to remind other vehicles or pedestrians when driving.

What is the difference between high beam and low beam of car headlights?

The light strength is different: the low-beam lamp is outside the focus, and the light emitted is in a difergent state, which can shine on a large range of objects nearby; the high-beam lamp is in the focus, and the light emitted will be emitted in parallel, and the brightness is large, which can shine on objects far and high.

The difference between far and near light sources is that one irradiation is close and one irradiation is relatively far. Under normal circumstances, low-beam lamps will shine within a distance of 30-40 meters, with an irradiation range of about 160°, while the light of high-beam lamps is relatively concentrated and bright, which can shine to higher and farther places.

The logo of the high beam is blue, and the logo of the low beam is green. The lom beam is for close-up lighting. The high beam adjusts the light according to the distance of the filament.The strength and weakness, the high beam is on its focus, and the light emitted will be emitted in parallel. The light is relatively concentrated and the brightness is large, which can shine on objects far and high.

The difference is that one is irradiated close and the other is irradiated farther away. Normally, the irradiation distance of the low beam lamp is about 30-40 meters, and the irradiation range is about 160 meters. The light of the high beam is relatively concentrated and the highlight is large, which can shine to higher and farther places. Of course, the irradiation distance will vary depending on the material of the headlight.

Different functions Car headlights are used for lighting devices on driving roads at night. High beam, high beam angle, high distance, can improve the vision and expand the observation field. The width indicator light indicates the width of the car to prompt the other party and the rear car. The width indicator light is used for other vehicles to see when driving in the evening.