OKX app

List of contents of this article:

• 1,What factors are the processing accuracy of the system signal
• 2、How to improve the accuracy of the servo system
• 3,OKX app What are the measures to ensure the positioning accuracy of the electromechanical system
• 4, The relationship between system accuracy, repetition accuracy and maximum resolution (precision)
• 5, How accurate is the Global Positioning System?
• 6, How to improve the measurement accuracy of the temperature measurement system?

What factors is the processing accuracy of the system signal

1. The accuracy of the motor test system is affected by the following factors: the accuracy of the test equipment itself: the accuracy and stability of the motor test system Qualitative is an important factor affecting the accuracy of the test. Test environmental factors: Environmental factors such as temperature, humidity, air quality, etc. will affect the test results.

2. Signal interference of the SA satellite of the U.S. Department of Defense. ( Satellite signals are controlled by the United States, and occasionally the signal service may be interrupted) weather factors.

3. The accuracy of contour processing is related to the coordinated control of speed control and linkage coordinates.In speed control, high speed regulation accuracy and strong anti-interference ability are required. ( 2) Fast response. In order to improve productivity and ensure processing accuracy, the servo system is required to track the command signal to respond quickly.

4. When using GPS for positioning, it will be affected by various factors.

5. I think it mainly depends on the accuracy of your input signal, such as the accuracy of your encoder. Of course, your control method and the calculation speed of the system will affect your accuracy, but the main thing is the accuracy of your acquisition of signals.

How to improve the accuracy of the servo system

1. The methods are as follows: First, adjust the parameter settings of the servo system, such as gain, bandwidth and filters, etc., theseThe adjustment of parameters should be optimized according to the specific situation to ensure that high positioning accuracy can still be maintained during high-speed movement. Finally, consider using more advanced control algorithms to improve the response speed and anti-interference ability of the system.

2. Adjust the processing process: If the accuracy of the keyway is not high enough, you can consider adjusting the processing process. For example, use more sophisticated processing equipment, tools or tools to improve the machining accuracy of keyways. In addition, the appropriate processing speed and feed rate will also affect the accuracy of the keyway, which needs to be adjusted according to the specific situation.

3. The rotor rotates under the action of this magnetic field. At the same time, the encoder of the motor feedbacks the signal to the driver. The driver adjusts the angle of rotation of the rotor according to the feedback value and the target value. The accuracy of the servo motor is determined by the accuracy (number of lines) of the encoder.

4. Transmission gap compensation: Improve the manufacturing and assembly accuracy of gears and screws of transmission components and take measures to eliminate transmission gaps, which can reduce but not completely eliminate transmission gaps.

5. The measures adopted to improve the accuracy of the servo system from the control method are: 1. Transmission gap compensation; 2. Screw pitch error compensation; 3. Subdivide the line.

6. What must be set is the control mode (position, speed, moment), and then the automatic gain adjustment (if the automatic adjustment is not in the best state, it will require a troublesome manual adjustment). If it is a position control, the electronic gear ratio should be set (too large or too small will lead to very low Speedy operation or speeding).

The relationship between system accuracy, repetition accuracy and maximum resolution (precision)

1. Resolution is the minimum resolution obtained by each transcurner and electrical subdivision of the encoder. The accuracy is determined by the number of lines engraved by the encoder and the error of the engraved lines on the encoder.

2. Accuracy refers to the degree closeness to the real value, that is, the size of absolute error or relative error.If the accuracy is one percent, it will be difficult. Generally speaking, high division rate is a necessary condition for high accuracy, and high division rate does not mean high accuracy. Accuracy indicates the proximity of the observed value to the true value.

3. The test accuracy of the central air conditioner has a certain relationship with the resolution.

How accurate is the Global Positioning System?

Globally, the positioning accuracy is better than 10 meters, the speed measurement accuracy is better than 0.2 meters/second, and the timing accuracy is better than 20 nanoseconds; in the Asia-Pacific region, the positioning accuracy is better than 5 meters, the speed measurement accuracy is better than 0.1 meters/second, and the timing accuracy is better than 10 nanoseconds. The BeiDou-3 system has a total of 30 satellites, and it is its 30th star launched today.

Beidou navigation is more accurate, and the positioning accuracy is at the decimeter and centimeter level.Difference: Different developing countries BeiDou satellite navigation system: China's self-developed global satellite navigation system. GPS Global Positioning System: a satellite navigation system developed and established by the U.S. Department of Defense.

The main features of the global positioning system: (1) Global, all-weather work. 1 High positioning accuracy. The positioning accuracy of the stand-alone machine is better than 10m. With differential positioning, the accuracy can reach the centimeter level and the millimeter level. 2 Many functions and wide range of applications.

The development country of the GPS satellite navigation system is the United States. In the 1970s, it was developed by the U.S. military and completed in 1994. It covers the world, with a total of 24 working satellites and 4 backup satellites, with a positioning accuracy of 10 meters.

How to improve the measurement accuracy of the temperature measurement system?

1. Electronic thermometer: Use an electronic probe to measure body temperature, which is more convenient than the traditional mercury thermometer. You can measure it by directly aiming the thermometer at the wrist, forehead and other positions. Other thermometers: such as infrared thermometers, which can be measured by patients standing in front of the instrument, which is suitable for large number of people.

2. In order to make the measurement results accurate and reliable. Minimize errors and improve measurement accuracy. It is necessary to fully understand the possible errors in measurement in order to take necessary measures to overcome them. Usually, there are basic error, compensation error, absolute error, relative error, system error, random error, error difference and sampling error, etc. in the measurement.

3. Improve the temperature measurement scheme. For example: work hard on the arrangement of the measuring points 2, the appropriate type of thermometer.